/
Maple Network Installation

Maple Network Installation

 

This Maple installation method is for UMBC-owned computers that remain on campus since activating Maple this way requires the computer to be connected to the campus network (Maple won't activate over the UMBC Visitor wireless connection). For UMBC-owned computers that may not always be on campus (like laptops) or connect to the campus network, and for non UMBC-owned personal computers, install Maple using the Stand-Alone installation instructions.

 

  1. Before installing Maple, you must be connected to the campus network (or the UMBC VPN if the device is off-campus).

  2. Download the Maple installer from the Downloads section of this page.

  3. Click the Maple installer that you downloaded to begin the installation.

  4. Click OK to continue.

    1.png

  5. Click Next to begin the installation setup.

    2.png

  6. Select I accept the agreement to accept the license agreement and then click Next to continue installing Maple.

    3.png

  7. Click Next to create an installation directory for Maple.

    4.png

  8. Select the components you want to install, and then click Next.

    5.png

  9. Select if you want a Maple shortcut on your desktop and then click Next to continue.

    6.png

  10. Select Network License and click Next to continue with the Maple installation.

    n1.png

  11. Select Single Server to proceed with the Maple installation.

    n2.png

  12. Enter license5.umbc.edu in the field labeled "License server" and 1703 under the field labeled "Port number", and then click Next to activate your Maple installation.

    n3.png

  13. Make the selections you want and then click Next.

    n4.png

  14. Maple will proceed to install.

    n5.png

  15. Click Finish to complete the Maple installation.

    n6.png

 

 

Request Help | Correct or Suggest an Article