Maple Network Installation



This Maple installation method is for UMBC-owned computers that remain on campus since activating Maple this way requires the computer to be connected to the campus network (Maple won't activate over the UMBC Visitor wireless connection). For UMBC-owned computers that may not always be on campus (like laptops) or connect to the campus network, and for non UMBC-owned personal computers, install Maple using the Stand-Alone installation instructions.



 Before installing Maple, you must be connected to the campus network or the UMBC VPN. Mac and Windows Maple installations are identical.



Maple for Windows: If the installer you downloaded is a zip file, right-click it and select “Extract All…”. Once extracted, open the folder it created and then click “setup-windows.exe” start the installer.



1)   Click the Maple installer that you downloaded to begin the installation.



2)  Click Next to begin the installation setup.

3)  Select I accept the agreement to accept the license agreement and then click Next to continue installing Maple.

4)  Click Next to create an installation directory for Maple.

5)  Click Next to proceed with the Maple installation.

6)  Select Network License and click Next to continue with the Maple installation.

7)  Select Single Server to proceed with the Maple installation.

8)  Enter license5.umbc.edu  in the field labeled "License server" and 1703 under the field labeled "Port number", and click Next to activate your Maple installation.

9)  Click Next to proceed with the Maple installation.

10)  Click Next to start the Maple installation, which will take a few minutes to complete.

11)  Click Finish to complete the Maple installation.