How to use ILSB116 combined for presentation

ILSB116 is set in either combined mode (wall is up) or separate mode (116A and 116B) for the duration of a semester.
The wall is only moved for exceptions.
Any time the wall is raised or lowered, both AV systems must be shut down using the control panels.
At least an hour is needed for testing the AV systems after raising or lowering the wall.

Show Me

Press "System Shut Down" on each AV touch panel control (ILSB116A and ILSB116B).
Raise the wall (requires keys and two people).
Wait a few minutes after wall is raised for sensors to engage.
Using the AV touch panel control on the ILSB116A side, press "Choose a Room Mode" (bottom right corner of screen).
A pop up screen appears - press "Combined Mode".
On the next screen, press "All", then the press the source you want on all displays - usually PC or Laptop. The audio and video will be sent to both 116A and 116B.
The microphones from 116A will send audio to both sides. Do not grab the microphones from 116B - they will only work on the 116B side.
When you are done, press System Off at the bottom right, then Power Down.