Projector setup

• Place Tabletop Projector in proper location given by marks on table,
• Connect Black power cable and Black video cable to Computer 2 on projector
• Turn off Ceiling projector by pressing and holding the "STANDBY" button on      SHARP Projector Remote
• Raise the screen with the key control on the wall
• Turn on tabletop Projector.

              *If desktop is not displayed: ensure Computer 2 input is selected

• Adjust Projector placement (as needed).

eBeam Physical Setup

•  Plug in eBeam power cable to receiver and to wall, ensure that the green ring is lit
•  Place eBeam receiver (magnetic) on metal mount: left edge of whiteboard
•  Plug in Bluetooth USB dongle into white extension cable (on table, under monitor)

eBeam Computer Setup

  *if computer does not recognize or connect to eBeam device

• Right click on Bluetooth icon next to the clock 
•  Left click on "Add a Bluetooth Device", click box next to "My device is ready..."
•  Click "Next" > Click Device "ebeam 22-2693" >
•  Select second option "Enter Passkey"> type "1234"> Click "Next"> Click Finish

eBeam Workspace Program

• Open eBeam Workspace Program on desktop or Start menu
• Calibrate eBeam by RIGHT clicking on the eBeam Workshop icon next to the clock and select Calibrate my device. Touch the wand to the red crosshairs and you're done.