Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 16 Next »

Tell Me


These instructions are for Turning Technologies ResponseCard RF clickers.

  1. Press the CH ←button in the lower left hand corner of your clicker.
  2. The light in the time right corner will flash red and green.
  3.  Enter the two digit channel code.
  4.  Press CH again.
  5.  When the ResponseCard receives the new channel, the light will turn green.

Rate this Article

  • No labels

Request Help | Correct or Suggest an Article