Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 2 Next »

20230404T1600-20230406T2000

Onkar, Roy, Tara

PHYS 401, 433C

Goals

  1. create 1:1 copy of tcs c: drive (Local Disk)
  2. boot tcs using copy drive and not original drive
  3. install lightweight win10 OS on tcs copy drive

Log

  1. onkar was bored
  2. onkar wanted to restart the p3 project (end goal is to have dc control everything)
  3. brain dump:
    1. things stopping us from full integration:
      1. ISA card that sends the motor commands cannot be installed on a modern PC due to the lack of ISA slots on modern motherboards
      2. unclear at this time whether ISA cards work properly on win10 and newer OS's
      3. DFMTCS (TCS software) does not want to open on DC even after all files had been copied over
        1. either an issue with drivers or with not properly running an "install DFMTCS" program on the dc
    2. possible solutions to solve these issues
      1. find PCIE to ISA internal or external conversion thingy
      2. fuck around and find out

Notes

ToDo

  • No labels