Page Comparison

Tell me

• If you're having trouble with your clicker, first try taking the batteries out and putting them back in.
• Double-check to make sure the batteries are not dead.  When you hit a button, the LED light in the upper left corner should light up.  If it does not, you will need to change the batteries.  The ResponseCard ("Clicker") takes two coin cell CR2032 (3.0V) lithium batteries, which can be purchased in the UMBC bookstore.
• When a poll is open and the light turns red when you enter your response, your clicker is not on the correct channel.  Check with your instructor to verify which channel you should be on.  Then follow the steps below to change the channel on your clicker.

Changing the Channel on Your Clicker

Source Article: How do I change the channel on my clicker?

Troubleshooting Your Clicker

If none of these resolve your clicker issue, please contact the Technology Support Center to troubleshoot the clicker. Click here to see the TSC's current hours of operation. If your clicker is found to be defective, please contact Turning Technologies for further support.