Versions Compared

Old Version 10

changes.mady.by.user Mariann Hawken

Saved on

compared with

New Version 11

changes.mady.by.user Former user

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Excerpt

Show Me

Image Removed

Video - 02:54

Tell Me

On a PC

Tip
TIP: Configure your audio and video prior to your scheduled meeting.

 

  • Enter your Blackboard Collaborate room/session located in your Blackboard course or sent to you as a link.
  • Click the Audio & Video panel on the left, down arrow next to the red gear and select Audio Setup Wizard.

  • From the Select Audio Output Device dialog, choose the device that will play the session audio e.g. speakers

  • Click OK

  • Click the Play button and adjust the volume slider so that you can clearly hear the pre-recorded message
  • Click Stop and then Yes to confirm you were able to hear the audio. If you were not able to hear the audio, click No and repeat the previous step
  • Select the device you will use to send your audio during the session e.g. microphone

  • Click OK

  • If you are using a headset or microphone just for you, select Single Talker. If you are using a single microphone to pick up multiple talkers in the same physical space, select Multiple Talkers

  • Click Record and speak into the microphone using your normal speaking voice. Adjust the microphone slide bar so that it displays green bars with an occasional yellow bar. Red indicates that your audio is too loud or you microphone is too close to your mouth

  • Click Play and confirm you can hear your recorded voice. You are now ready to participate in the audio portion of the session
    • If you cannot access the Collaborate session through your course, go to this website for first time users - it may direct you to download java.

    Preparing for your live session

    Test Your Camera and Microphone

    • From within the Collaborate session, locate the three arrows in the bottom right-hand corner.

    • Click on the Gear icon to access settings

    • Click “Set Up your Camera and Microphone”

    • Follow the on-screen instructions to make sure your camera and audio are working properly

     Moderators, Presenters, and Participants

    • Moderators are the individuals who are running and facilitating the session. Presenters are individuals who are presenting during a session. The moderator has the ability to allow any participant to become a presenter. Participants are individuals who are attending and viewing your session.

    Chat

    • You can chat either individual participants, or the entire participant list. Click on the three arrows in the bottom right-hand corner, and select the Chat bubble icon.

    Sharing Your Screen

    • If you plan on Screen Sharing, make sure your desktop is cleared, and ready to present.

     

    Rate this Article