Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 50 Current »

The activation method below is for UMBC owned computers only. Only the Enterprise and Education editions of Windows are supported (determining your version of Windows).

Windows won't activate over the UMBC Visitor wireless connection or from an off-campus internet connection. To activate Windows, you will either need to be connected to the UMBC campus network or connected to the UMBC VPN if you are using an off-campus internet connection. If the activation fails despite being on the VPN or campus connection, right-click the win_activate.bat file and select Run as administrator. If your user account doesn’t have administrative rights, you may not be able to complete the activation.

Tell me

  1. Right-click the following file and select "Save link as..." to download it: win_activate.zip 
  2. Right-click on the file you downloaded (win_activate.zip) and select "Extract All" to unzip it. Once unzipped, open the folder that was created and then double-click on win_activate.bat to initiate the activation process.
    1. A command prompt window will appear running commands. After a few seconds you will be prompted with the following message. Click "OK" to allow the activation process to continue.

    2. After a few more seconds the following message should appear indicating Windows has been successfully activated. Click "OK" to complete the activation procedure.

               

Rate this Article

  • No labels