Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 17 Next »

Tell Me


These instructions are for Turning Technologies ResponseCard RF clickers.

  1. Press the CH ←button in the lower left-hand corner of your clicker.
  2. The light in the time right corner will flash red and green.
  3.  Enter the two-digit channel code.
  4.  Press CH again.
  5.  When the ResponseCard receives the new channel, the light will turn green.

Rate this Article

  • No labels

Request Help | Correct or Suggest an Article