Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

Tell Me

  1. On your phone, press <Home>, then open the E-mail application
  2. On the Your accounts page, select Next to get started with setup
  3. Enter your UMBC e-mail address (jack@umbc.edu) and myUMBC password, then select Next
  4. Select IMAP account and then select Next
  5. On the Incoming server settings page, some fields may be pre-populated. Make sure to change the following:
    • For Username, enter your full UMBC e-mail address: jack@umbc.edu (Note: This must be the fully-qualified address, so be sure to include the @umbc.edu in it.)
    • For the Password, enter your myUMBC password
    • For IMAP server, enter imap.gmail.com
    • For Port enter 993
    • For Security type select SSL (always)
  6. Select Next
  7. On the Outgoing server settings page, some fields may be pre-populated. Make sure to change the following fields:
  • For SMTP server enter smtp.gmail.com
  • For Port, enter 465
  • For Security type, select SSL (always)
  • Select Next and continue through the setup options.

Rate this Article

  • No labels