Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Connected DC to TCS via gray ethernet cable. Saw changes in DC-reported ipconfig  before and after (see below).
  2. We see that the new connections find MAC addresses and IPs, but we don't know where the IPs come from.
  3. We followed this tutorial https://www.maketecheasier.com/connect-two-windows-computer-on-lan/
  4. After the tutorial, T.C.S connects to D.C 0. With TCP/IP connection on, Zenmap detects host up on 192.168.0.2:5003 (IP address : port)
  5. A Wireshark scan confirms connection to T.C.S from D.C. and it also confirms packets are sent (converting hexadecimal output from wireshark to ASCII confirms command was sent)
    1. Image Added

      The first 3 packets are the connection of the TCP/IP client to the TCP server. The rest are commands sent which seem to be successful, but they don't update the values in DFMTCS.

BIG NOTE:

It is very possible that the DFM software is bugging due to some change we made. Connecting to itself from T.C.S no longer works like it did previously. The DFMTCS logs confirm that DFMTCS detects both the connection from the client and the TCP packets/commands.

Connecting the T.C.S to the D.C and sending commands from D.C also doesn't work, however DFMTCS logs on the TCS confirm DFMTCS detects commands and connection again.

DFMTCS presents "Asynchronous socket error 10053." error window. Error also presents itself in DFMTCS log "TCP/IP: Disconnection Error Code: 10053 Addr: 192.168.0.2 Port:5003"

Other Notes

Code Block
languagebash
titlenmap -p 5003 -Pn 192.168.0.2 (With TCP/IP server off)
collapsetrue
PORT     STATE    SERVICE

5003/tcp filtered filemaker

MAC Address: 00:18:7D:12:A1:D0 (Armorlink .Ltd)



Nmap done: 1 IP address (1 host up) scanned in 0.35 seconds


Code Block
languagebash
titlenmap -p 5003 -Pn 192.168.0.2 (with TCP/IP server ON)
collapsetrue
PORT     STATE SERVICE

5003/tcp open  filemaker

MAC Address: 00:18:7D:12:A1:D0 (Armorlink .Ltd)



Nmap done: 1 IP address (1 host up) scanned in 0.12 seconds



Changes in ipconfig 


Code Block
languagepowershell
titleBefore Connection
collapsetrue
PS C:\Users\Director> ipconfig

Windows IP Configuration


Ethernet adapter Ethernet 2:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :

Ethernet adapter Ethernet 3:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :

Ethernet adapter Ethernet:

   Connection-specific DNS Suffix  . : umbc.edu
   Link-local IPv6 Address . . . . . : fe80::ebf9:7f4d:cc98:6e41%11
   IPv4 Address. . . . . . . . . . . : 130.85.72.207
   Subnet Mask . . . . . . . . . . . : 255.255.255.128
   Default Gateway . . . . . . . . . : 130.85.72.129

Wireless LAN adapter Wi-Fi:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . : umbc.edu

Wireless LAN adapter Local Area Connection* 1:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :

Wireless LAN adapter Local Area Connection* 10:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
PS C:\Users\Director>

...