Solstice Quick Start Guide: Step 1:
- Make sure you are connected to WiFi. Turn on the AV display system and select the Solstice option on the AV control.
...
- Download and install the Mersive Solstice application (if you do not have it).
...
- The download can be found at, https://www.mersive.com/download/
...
Step 3: Open the Solstice app. Enter the IP address from the room’s Solstice. Once you put in the IP and hit go you will be prompted to enter a four digit code that will also be on the screen.
Step 4: Sharing your content
PC Users:
...
- When the application has finished downloading you will open it and see this screen:
- From this you will click enter IP and enter the IP that is on the screen in your room. After you have entered it you will be asked for a code that will flash on the screen.
- After you have entered the
...
- IP you will be presented with this screen:
- From here you can either share your whole desktop by clicking desktop. Or an app by selecting app window.
- Once you are done you can hit stop sharing and then disconnect in the
...
- Solstice window.
Here is a link Link to a start up video: https://youtu.be/hjjoYPlEqpc
If you would like a tutorial, please fill out the form here: https://doit.umbc.edu/request-av-services/