Content Comparison

...

• If the Dome and Scope seem misaligned:
  • If DFMTCS reports the Dome and Scope are in the same positions (Reported "Azimuth")
    • Using handpaddle: Align Dome to Scope while AutoDome is disabled
    • After aligning, navigate to DFM TCS > Telescope > Initialization > Other Positions> "Set Dome Position" and press "Use Telescope Azimuth", then "Apply".
  • If it doesn't
    • Perhaps wait for a bit for the DFM TCS to poll again or try changing the telescope position (aka try again)

TODO: Figure out how to set home position Roy Prouty , Gabriel Koletsi , Former user (Deleted) 

Written by Gabriel, kinda.

...